• Send Us a Message
  • Installment payment options available at checkout

    Quilt Ruler Upgrade Kit

    The Upgrade Kit works with
    12" & 24"
    (or 12½" & 24½")
    standard ⅛" thick quilt
    rulers with no lip edge

    Rulers Not Included in the Kit

    • For both right & left-handers
    Quilt Ruler Upgrade Kit by Guidelines4Quilting
    Sold out

    The Kit Includes:

    Quilt Ruler Upgrade Kit by Guidelines4Quilting

    Quilt Ruler Connector / Handle:

    Do more with your rulers!

    Sold out

    2-Minute Tutorial Video:

    Testimonial

    Dava Brothers / Phoenix, AZ
    "I use the 24” ruler guide every day
    to cut endless strips of fabric for
    my fabric wrapped rope bowls.
    These are measured at 1⅛” wide.
    The ruler guide gets it right
    every time with no slippage."


    All of our products are made in the US


    The Kit Contents

    1) Six Grip Strips (11¾” long)

    Crystal Clear
    Repositionable
    No Sticky Residue

    2) Two Guide Lock Strips

    (paper-thin textured strips)
    prevent the 24" Fabric Guide
    from shifting in the middle

    while cutting fabric

    3) Two Fabric Guides
    with Stretchy Bands

    Clip on & Slide to the measure-

    ment line you want

    Quilt Ruler Upgrade Kit

    Cut accurate strips & squares in a fraction of the time,

    even 1⅛" strips shown in the video below.

    The Upgrade Kit works with 12" & 24" (or 12½" & 24½")

    standard ⅛" thick quilt rulers with no lip edge

    (Rulers are not included in the kit.)

    • For both right & left-handers

    Quilt Ruler Upgrade Kit

    Quilt Ruler Connector / Handle

    Sold out
    Sold out

    The 2-minute tutorial video below demonstrates how to cut strips & squares
    and how to set up all the items included in the Quilt Ruler Upgrade Kit:

    Dava Brothers / Phoenix, AZ
    "I use the 24” ruler guide every day to cut endless strips of fabric for my fabric wrapped rope bowls.
    These are measured at 1⅛” wide. The ruler guide gets it right every time with no slippage."


    Quilt Ruler Connector / Handle:

    Square up accurately

    Cut wide or longer pieces

    Use it as a handle on a single ruler or template


    The Quilt Ruler Upgrade Kit Contents:

    For Both Right and Left-Handed Use.

    Works with 12" / 12½” and 24" / 24½” rulers of any brand that are ⅛" thick.

     

    *** Scroll Down for Three Simple Steps to Use the Kit. ***

    Grip Strips
    to
    slip-proof your rulers.

    • Six crystal clear strips (11¾” long)
      Repositionable. Removable.
    • Leave no sticky residue

    Guide Lock Strips
    for your 24" ruler

    • Two paper-thin 5”x ½” textured strips
    • Important: Attach them on your 24” ruler, so the 24” Fabric Guide does not shift in the middle while butting up against your fabric.

    Fabric Guides
    to catch fabric's edge.

    • Clip-on Guides with built-in industrial strength stretchy bands.
    • The 24" Fabric Guide is folded
      in half in the package.
    • Six strips will be enough to slip-proof your 12" & 24" rulers. If you need extra strips to slip-proof other rulers and templates, get more here:

    Grip Strips and Fabric Guide work together,

    so your ruler won't wobble while cutting.

    how the quilt ruler upgrade kit works

    Grip Strips also
    slip-proof your rulers:

    Three Steps to Upgrade Your Rulers:

    Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.

    Six strips are included in the Kit. Two for your 12" ruler and four for your 24" ruler.

    Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.

    Perfect!

    Attach them as close as possible to the edges of your ruler.

    Attach on both edges, so your ruler won't tilt in one side.

    Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.

    Step 2: Attach Guide Lock Strips on Your 24" Ruler.

    Step 2:

    Attach Guide Lock Strips Underneath Your 24" Ruler.

    Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.

    Note: You don't need them on your 12" ruler.

    Guide Lock Strips come with permanent adhesive.

    Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.

    Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.

    Important: Keep the Fabric Guides Straight.

    The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.

    • Slide one hook onto one end of your ruler.

    Three Simple Steps to Upgrade Your Rulers:

    Three Steps to Upgrade Your Rulers:

    Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers

    Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.

    Six strips are included in the Kit. Two for your 12" ruler and four for your 24" ruler.

    Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.

    Use two for your 12" ruler and four for your 24" ruler.

    Perfect!
    Attach them right up to the both edges, but not beyond

    Attach them as close as possible to the edges.

    Attach on both edges, so your ruler won't tilt in one side.

    Don't skimp on them.
    When you leave a gap, it will cause ripples in your fabric.

    Perfect!

    Attach them as close as possible to the edges of your ruler.

    Attach on both edges, so your ruler won't tilt in one side.

    Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.

    Step 2: Attach Guide Lock Strips Underneath Your 24" Ruler

    Step 2: Attach Guide Lock Strips on Your 24" Ruler.

    Step 2:

    Attach Guide Lock Strips Underneath Your 24" Ruler.

    Guide Lock Strips keep the 24” Fabric Guide from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.

    Guide Lock Strips
    Guide Lock Strips

    Note: You don't need

    them on your 12" ruler.

    Guide Lock Strips come with permanent adhesive.

    Get Extra Strips
    if you have more than
    one 24" ruler or if
    your ruler breaks.

    Sold out

    Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.

    Note: You don't need them on your 12" ruler.

    Guide Lock Strips come with permanent adhesive.

    Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.

    Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers

    Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.

    Important: Keep the Fabric Guides Straight.

    The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.

    Clip the Fabric Guides on your 12" & 24" quilt rulers
    and slide them to the measurement lines you want.

    Fabric Guides
    • Slide one hook onto one end of your ruler.

    Important: Keep the Fabric Guides Straight.

    The Fabric Guides are made of tough polypropylene, but they have to be very thin
    to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.

    Note: The hooks on the ends of the Fabric Guides will be sliding over the markings on the ends of your ruler, so you may want to put strips of tape right along both edges underneath your rulers to protect the markings there as well.

    Also some quilt rulers such as Fiskars' are slightly thinner than standard rulers that are ⅛" thick, so the Fabric Guides may stay put better if you put tape on both short ends.

    Fabric Guides

    Spare Parts

    Fabric Guides need to be used together

    with Grip Strips for accurate cutting

    12" Fabric Guide

    Fabric Guides

    24" Fabric Guide

    Guide Lock Strips
    for your 24" rulers
    with permanent adhesive

    Grip Strips

    You can always use extra for all
    the rulers and templates you have.

    Sold out
    Sold out
    Sold out
    Sold out

    3 Steps to Use the Kit

    Step 1

    Peel & Stick Grip Strips
    on your 12" & 24"

    (or 12 ½" & 24 ½") Rulers

    Step 2

    Attach Guide Lock Strips
    underneath your 24" or 24 ½" Ruler

    between 9" &1 0" lines
    and 14" & 15" lines.

    Guide Lock Strips keep the 24” Fabric Guide from shifting in the middle underneath your ruler no matter how many layers of fabric you are lining up to.

    Note: You don't need them

    on your 12" ruler.

    Guide Lock Strips come with permanent adhesive. Get extra strips here if you have more than one 24" ruler or if your ruler breaks.

    Sold out

    Step 3

    Clip the Fabric Guides on
    your 12" & 24"
    (or 12 ½" & 24 ½") Rulers.

    Clip the Fabric Guides on your 12" & 24" quilt rulers and slide them to the measurement lines you want.

    The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.

    Note: The hooks on the ends of the Fabric Guides will be sliding over the markings on the ends of your ruler, so you may want to put strips of tape right along both edges underneath your rulers to protect the markings there as well.

    Also some quilt rulers such as Fiskars' are slightly thinner than standard rulers that are ⅛" thick, so the Fabric Guides may stay put better if you put tape on both short ends.

    Fabric Guides