Scroll down for the kit content and instructions.
Quilt Ruler Upgrade Kit Contents & Instructions
- For both right & left-handed use.
- Works on 12" / 12½” and 24" / 24½” rulers.
Scroll down for instructions.
1. Grip Strips to slip-proof your rulers.
- 6 crystal clear strips. 11¾” x ¼".
- Repositionable. Removable.
- Leave no sticky residue
2. Two Fabric Guides
- Clip-on Guides with built-in industrial strength stretchy bands.
- The 24" Fabric Guide is folded in half in the package.
3. Guide Lock Strips
- Two paper thin 5”x ½” strips
- Important: Attach them on your 24” ruler, so the 24” Fabric Guide does not shift in the middle while butting up against your fabric.
Grip Strips and Fabric Guides are the same thickness, so everything stays perfectly level.

Perfect4Patern Set
Add both Connector & Seam Guide Setter to square up, cut & sew accurately.
What's included in the Quilt Ruler Upgrade Kit.
*** Scroll down for instructions. ***
For Both Right and Left-Handed Use.
Works on 12" / 12½” and 24" / 24½” rulers.
Grip Strips to slip-proof your rulers.
- 6 crystal clear strips. 11¾” x ¼".
- Repositionable. Removable.
- Leave no sticky residue
Guide Lock Strips for a 24" Fabric Guide
- Two paper thin 5”x ½” strips
- Important: Attach them on your 24” ruler, so the 24” Fabric Guide does not shift in the middle while butting up against your fabric.
Three Steps to Upgrade Your Rulers:
Three Steps to Upgrade Your Rulers:
Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.
Six strips are included in the Kit.
Two for your 12" ruler and four for your 24" ruler.
Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.
Six strips are included in the Kit. Two for your 12" ruler and four for your 24" ruler.
Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.
Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.
Perfect!
Attach them as close as possible to the edges of your ruler.
Attach on both edges, so your ruler won't tilt in one side.
Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.
Perfect!
Attach them as close as possible to the edges of your ruler.
Attach on both edges, so your ruler won't tilt in one side.
Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.
Step 2: Attach Guide Lock Strips on Your 24" Ruler.
Step 2: Attach Guide Lock Strips on Your 24" Ruler.
Step 2:
Attach Guide Lock Strips Underneath Your 24" Ruler.
Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.
Note: You don't need them on your 12" ruler.
Guide Lock Strips come with permanent adhesive.
Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.
Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.
Note: You don't need them on your 12" ruler.
Guide Lock Strips come with permanent adhesive.
Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.
Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.
Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.
Important: Keep the Fabric Guides Straight.
The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.
Important: Keep the Fabric Guides Straight.
The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.
- Slide one hook onto one end of your ruler.
- Slide one hook onto one end of your ruler.
- Stretch the Guide and slide the other hook straight onto the other end of the ruler.
- Once attached, you can slide the Guide to the measurement line you want.

Upgrade Kit Extras and Replacements
Did you know that GripStrips can be cut or bent to fit on any ruler or template?
Get an extra pack of Grip Strips (6 per pack):
Grip Strips need to be used together with Fabric Guides for accurate cutting (See why below), but if you already have Grip Strips on your rulers, you can buy Fabric Guides separately here:
12" Fabric Guide
24" Fabric Guide
(Must be used
with Guide Lock Strips)
Guide Lock Strips come
with permanent adhesive.
Get spare strips (2 ct.) if you have more than one 24" ruler.
Square Up Cut & Sew Accurately
Watch the video below, showing the tools included in the Perfect4Pattern Set. Square up, cut & sew quilt pieces accurately. No more slipping rulers! No more lining up by eye!
Perfect4Pattern Set
What's included in the Quilt Ruler Upgrade Kit.
For Both Right and Left-Handed Use.
Works on 12" / 12½” and 24" / 24½” rulers.
Grip Strips
slip-proof your rulers.
- 6 crystal clear strips. 11¾” x ¼".
- Repositionable. Removable.
- Leave no sticky residue
Two Fabric Guides
- Clip-on Guides with built-in industrial strength stretchy bands.
- The 24" Fabric Guide is folded in half in the package.
Guide Lock Strips
- Two paper thin 5”x ½” strips
- Important: Attach them on your 24” ruler, so the 24” Fabric Guide does not shift in the middle while butting up against your fabric.
Kathy Oster - Lewistown, MT
"I bought your quilt guide set from the new quilt shop here in Lewistown, MT and I've never been happier with a tool! I'm getting on in years(74) and my sight isn't what it was but the guides made cutting my last quilt blocks so much easier!!! Wish I'd had them a lot sooner in my sewing life. Thank you for the best quilting tool I've ever owned!"
Judith Armstrong - Truckee, CA
"I use your guides (Quilt Ruler Upgrade Kit ) almost daily and find they are a lifesaver. Thank you for designing them and making them available."
Leann Ivins Williams via Facebook
"Love your guides you can put on rulers. Most of my rulers had them on them and I don't have to worry about the rulers moving on the fabric."
Grip Strips and Fabric Guides are the same thickness,
so everything stays perfectly level.

SAVE 15%!
Click here to sign up for newsletters.
Get special offers & a promo code to save 15% now.
Save 15% + Free Gift
Enter Promo Code
P4P15
Three Steps to Upgrade Your Rulers:
3 Steps to Upgrade Your Rulers
Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.
Six strips are included in the Kit.
Two for your 12" ruler and four for your 24" ruler.
Step 1: Peel & Stick Grip Strips on Your 12" & 24" Rulers.
6 strips are included in the Kit. 2 for your 12" ruler and 4 for your 24" ruler.
Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.
Peel crystal clear Grip Strips (11¾” long) off the brown backing paper.
Perfect!
Attach them as close as possible to the edges of your ruler.
Attach on both edges, so your ruler won't tilt in one side.
Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.
Perfect!
Attach them as close as possible to the edges of your ruler.
Attach on both edges, so your ruler won't tilt in one side.
Don't skimp on them. When you leave a gap in between, it will cause ripples in your fabric.
Step 2: Attach Guide Lock Strips on Your 24" Ruler.
Step 2: Attach Guide Lock Strips Underneath Your 24" Ruler.
Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.
Note: You don't need them on your 12" ruler.
Guide Lock Strips come with permanent adhesive.
Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.
Guide Lock Strips keep the long, 24” Fabric Guide, from shifting in the middle underneath your ruler no matter how much fabric you are lining up to.
Note: You don't need them on your 12" ruler.
Guide Lock Strips come with permanent adhesive.
Get extra strips here if you have more than one 24" ruler or in the case your ruler breaks.
Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.
Step 3: Clip the Fabric Guides onto Your 12" & 24" Rulers.
Important: Keep the Fabric Guides Straight.
The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.
Important: Keep the Fabric Guides Straight.
The Fabric Guides are made of tough polypropylene, but they have to be very thin to fit under your ruler. Be sure not to bend them when you slide them on or slide them off.
- Slide one hook onto one end of your ruler.
- Slide one hook onto one end of your ruler.
- Stretch the Guide and slide the other hook straight onto the other end of the ruler.
- Once attached, you can slide the Guide to the measurement line you want.

Square Up Cut & Sew Accurately
Watch the video below, showing how to square up, cut & sew quilt pieces accurately. No more slipping rulers! No more lining up by eye!
Square up, cut & sew accurately!
Watch this video from Quilt Market in Houston showing how to use the Perfect4Pattern Set below.